Labelle DCC / DC Track Conditioner (For all Brands and Scales of model train track) Problem: A dirty track can be the biggest frustration of running trains on your layout. If your trains headlight flickers when running down the track, that is a sure sign your DCC packets are not getting through uninterrupted. Also on most layouts of any size, 80% of your track is within reach and cleaned by hand, but what about the other 20%? Do you Need a step tool to reach the other 20% or to crawl around underneath? Description: Labelle DCC / DC Track Conditioner If operating in either DC or DCC mode, and your locomotives have headlight flicker or your Decoders are cutting in and out, it is a sure sign your track needs cleaning with this Product. Just clean your track with this product, and leave a micro-coating on the rails of LaBelle #105 and it will dramatically improve your DC/ DCC reliability. Procedure: #1) Just apply a few drops of the Labelle 105 Track Cleaner and run round Your trackage for about 15 circuits. #2) Clean off the Pad with a paper towel. Re-wet with more Labelle Track cleaner and do another 15 circuits. #3) You will notice the Labelle 105 leaves a film of Lubricant on the top of the rails.. THATS GOOD. That film will help your trains run more smoothly. Labelle 105 is a Dielectric fluid that allows better conductivity for your DCC trackage. #4) If the film is more or less clear you are good to go. If the film is still dirty looking, repeat Steps #1 and #2 until the film on the rails is clear. IMPORTANT: Even if your track is fairly clean, running the track cleaning car with a bit of Labelle 105 on the Pad for a couple of loops just before every operating session will improve the running of your locomotives.
- If Locomotive Headlight “Flickers” Track needs to be cleaned
- Free cleaning Video on Labelle-Lubricants website
- Labelle-Lubricants is the #1 seller in Hobby Shops
- Recommended also to be used to clean Slot-car racing track.